Product Description
Product Description |
|
|
Due to its numerous serial interfaces and the
powerful 68040V/68060 CPU, the B5 CPU board is optimized for high-speed
communication control. All of the serial lines of the 68360 are available:
one Ethernet 10Base-T, three RS232 interfaces, and two RS232, RS422, RS485
or TTY interfaces (or optional second Ethernet). Two full/extended CAN
interfaces complete the B5's communication features. |
|
Technical Data |
|
|
CPU |
MC68040/33MHz (or option:
MC68060/50MHz) |
|
Peripheral Controller |
32-bit CPU MC68360/33MHz |
|
VMEbus |
3U VMEbus form factor VMEbus master/slave interface |
|
Memory |
Up to 512KB boot Flash Up to 1MB SRAM Up to 4MB DRAM on board Up to 32 MB DRAM Up to 8MB Flash |
|
Interfaces |
2 SMC UARTs 1 SCC intelligent serial interface Ethernet controller 2 serial SA adapter interfaces CAN bus interfaces |
|
M-Module Extension |
1 M-Module slot (requires
additional VMEbus slot and front panel) Characteristics: A08, A24, D16,
INTA, INTC, TRIGA, TRIGB, DMA D32, DMA, TRIGA, TRIGB access is
supported only for local CPU Dual-ported |
|
Miscellaneous |
Battery-backed real-time clock Programmable watchdog Serial EEPROM (4Kbit) for setup Hex switch Four programmable LEDs Reset button and abort button Single 5V supply (12V for
M-Modules if installed) |
|
Electrical Specifications |
Optical isolation: 1kV DC Isolation voltage for Ethernet/CAN
bus: 500V DC Supply voltage/power consumption:
+5V (4.85V..5.25V), 1.5A typ. MTBF: 45,000h @ 50°C |
|
Mechanical Specifications |
Dimensions: standard single
Eurocard, 100mm x 160mm Weight: 260g |
|
Environmental Specifications |
Temperature range (operation): Temperature range (storage):
-40..+85°C Relative humidity range
(operation): max. 95% non-condensing Relative humidity range (storage):
max. 95% non-condensing Altitude: -300m to + 3,000m Shock: 15g/0.33ms, 6g/6ms Vibration: 1g/5..2,000Hz |
|
Safety |
PCB manufactured with a
flammability rating of 94V-0 by UL recognized manufacturers |
|
EMC |
Tested according to EN 55022 /
1999-05 (radio disturbance) and EN 55024 / 1999-05 (immunity) with regard to
CE conformity |
|
Software Support |
MENMON OS-9 |
Diagram |
|
Related Products & Downloads |
|
|
Standard Hardware |
|
|
|
B5, VMEbus 3U, single-board computer, CPU 68360/33MHz + 68040V/33MHz, 4MB DRAM, 1MB SRAM, 4MB Flash, 0.5MB boot Flash, 3xRS232, 2x Extended CAN, Ethernet (Twisted Pair), 1-slot solution |
|
|
B5, VMEbus 3U, single-board computer, CPU 68360/25MHz + 68060/50MHz, 4MB DRAM, 4MB Flash, 1MB SRAM, 512KB Boot Flash, 2x CAN, 3x RS232, 1x Ethernet via twisted pair, VIC 64 VMEbus interface |
|
|
B5, VMEbus 3U, single-board computer, temperature range -40..+85°C, CPU 68360/33MHz + 68040V/33MHz, 4MB DRAM, 1MB SRAM, 4MB Flash, 0.5MB boot Flash, 3xRS232, 2x Extended CAN, Ethernet (Twisted Pair), 1-slot solution |
|
|
B5, VMEbus 3U, Single Board Computer, temperature range -40...85°C, CPU 68360/25MHz + 68060/50MHz, 4MB DRAM, 4MB flash, 1MB SRAM, 512KB Boot flash, 2x CAN, 2x RS232, 1xISO, 1x Ethernet via twisted pair, VIC 64 VMEbus interface |
|
Please refer to our 3U VMEbus compare chart for a selection
of further single-board computers with different processors and on-board
functionality. |
|
|
Systems & Card Cages |
|
|
Disk drives for basic systems are delivered as requested.
Different rack sizes, power supplies and backplanes on request. |
|
|
|
CE-conformal housing for VMEbus 3U: closed 19" rack, 4U, 9 slots, J1 backplane, power supply 230V, fan |
|
Accessories |
|
|
|
Interface cable: 9-pin micro D-Sub to 9-pin D-Sub (2m) |
|
|
Accessory kit for B5: 1-slot front panel, M-Module mounting kit, cover plates for M-Module and SA adapter |
|
|
Front-panel cover for M-Module cut-outs at front panels, snap-in, 10 pcs |
|
|
32MB DRAM 0..+60°C for 01B005-03 |
|
|
32MB DRAM -40..+85°C for 01B005-05 |
|
|
Serial interface adapter, RS232, not optically isolated, 0..+60°C |
|
|
Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C |
|
|
Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C |
|
|
Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C |
|
|
Serial interface adapter, RS232, optically isolated, 0..+60°C |
|
|
Serial interface adapter, RS232, optically isolated, -40..+85°C |
|
|
Serial interface adapter, TTY, optically isolated, 0..+60°C |
|
|
Serial interface adapter, Ethernet 10Base-T, 9-pin D-Sub connector, electrically isolated, 0..+60°C |
|
|
Serial interface adapter, fiber optic Ethernet 10Base-FL, serial UART full duplex, 0..+60°C |
|
For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can
be used in the board configuration you are looking for. |
|
|
Software |
|
|
|
OS-9 V.3.0: OS-9/68k + NET license |
|
|
OS-9 V.3.0.3: BSP for B5 (object code, floppy disks, MEN) |
|
|
|
|
|
|
|
Documentation |
|
|
|
B5 user manual |
|
01B005-EU |
EU Manufacturer declaration for this product |
;)
For
OS-9 BSP and driver support provided by MEN please refer to the ordering
numbers below.
MEN
has vast experience with CANopen-based implementations on standard and
custom boards and systems. The CANopen protocol stack on MEN solutions runs
under Windows®, Linux, VxWorks®, QNX®, OS-9 and other software environments.
You will find more information about CANopen under