|
Technical
Specifications
|
Supported in LV-SDS |
yes |
| Chip
type |
monochrome |
| Chip
size |
1/2" |
|
Interface |
Analog |
| Video
type |
Monochrome |
| Video
norm |
RS170 |
| Pixel
format |
Analog |
|
Resolution |
646¡Ñ492 |
| Full
frame shutter |
yes |
|
Scanning mode |
Progressive |
| Taps |
2 |
| Speed
(nominal) |
30 |
| Speed
(max) |
60 |
|
Shutter speed |
1/63
?1/39000 |
|
Programmable shutter |
yes - via
LV-SDS |
|
Asynchronous reset |
yes,
supported in LV-SDS |
|
External sync |
H/V |
|
Partial scan |
n/a |
| RS232
control |
yes |
| Cell
size |
9¡Ñ9 µm |
|
Presentation |
compact |
| Lens
mount |
C-mount |
|
Dimensions |
50¡Ñ80¡Ñ40 mm |
| Weight |
245 g |
| Power
consumption |
2.00 W |
| S/N
ratio |
56 dB |
|
Operating temperature |
-10 ¡V
50 ¢XC |
|
Operating humidity |
80 % |
Complementary
and Related
Products
| Ordering
number |
Grabber |
Description |
| 10440 |
PicPort-Stereo-25D
for LVmPC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, two digitizing
channels for a dual-channel camera. Version for LVmPC system. |
| 11022 |
PicPort-Stereo-H4D |
Analog frame grabber
for dual-channel monochrome cameras. Slave/master sync, pixel sync,
asynchronous reset. Four Hirose-12 connectors, two digitizing channels
for acquiring a dual-channel camera. Version for standard PCI bus. |
| 11025 |
PicPort-Stereo-H4D-CPCI |
Analog frame grabber
for dual-channel monochrome cameras. Slave/master sync, pixel sync,
asynchronous reset. Four Hirose-12 connectors, two digitizing channels
for acquiring a dual-channel camera. Version for CompactPCI bus. |
| 11030 |
PicPort-Stereo-25D-PMC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, two digitizing
channels for a dual-channel camera. Version for PMC form factor. |
¡@
| Ordering
number |
Cable |
Used with |
Description |
| 14832 |
Cab/3m/PPM-25x/4xBNC |
PicPort-Mono-25S-PMC,
PicPort-Stereo-25S-PMC, PicPort-Stereo-25D-PMC |
Camera cable for
PicPort-Mono-25x or Stereo-25x (PMC-Module or PentiCam), Dsub25 male <->
4xBNC-connector, to connect up to 4 standard cameras, excluding power
supply through PicPort resp. PentiCam, an external power supply is
needed |
| 14300 |
Cab/1m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
| 14302 |
Cab/3m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
| 14305 |
Cab/10m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
|
